Inconel 600 螺栓 UNS N06600/NS312/NiCr15Fe/2.4816

Model:Inconel 600            Product Brand:Chengxin

Inconel 600 Bolt UNS N06600/NS312/NiCr15Fe/2.4816

Inconel 600 (UNS N06600) bolts are high‑performance fasteners manufactured from nickel‑chromium‑iron solid‑solution‑strengthened alloy. Featuring outstanding high‑temperature corrosion resistance, oxidation resistance and stress‑corrosion‑cracking resistance, they are widely used in harsh environments for nuclear, chemical and energy industries. Below are the key specifications:Parameters:

• Category: Hex Bolt
• Head Type: External Hex Threaded Head
• Tolerance: 6G
• Material: Inconel 600
• Property Class: 8.8
• Thread Size: M6 ~ M100
• Across‑flat Dimension: 10‑120(mm)
• Head Thickness: 6.6‑60(mm)
• Overall Length: 30 ~ 800(mm)

1. Material Properties

• Typical Chemical Composition:
  • Nickel (Ni) ≥72%, Chromium (Cr) 14‑17%, Iron (Fe) 6‑10%, Carbon (C) ≤0.15%, Manganese (Mn) ≤1.0%, Sulphur (S) ≤0.015%, Silicon (Si) ≤0.5%.
• Strengthening Mechanism: Solid‑solution strengthening. High nickel and chromium contents form a dense protective oxide film to improve corrosion and oxidation resistance.
• High‑temperature Performance: Continuous operating temperature up to 1090 °C; short‑term temperature resistance up to 1200 °C. Maintains high strength and creep resistance at elevated temperatures.

2. Core Advantages

1. Corrosion Resistance
   • Resistant to oxidizing acids (nitric acid, sulfuric acid), chlorides, seawater and sulfur‑bearing environments. Especially resistant to stress‑corrosion cracking (SCC), suitable for primary and secondary loops of nuclear reactors.
2. High‑temperature Stability
   • Retains high tensile strength (≥550 MPa) and fatigue resistance above 700 °C, suitable for long‑term load‑bearing service under high‑temperature conditions.
3. Workability & Weldability
   • Formable by hot forging and hot rolling. TIG or MIG welding is recommended with ENiCr‑3 filler wire. Post‑weld heat treatment is not required.

3. Application Areas

• Nuclear Industry: Bolts for reactor control‑rod drive mechanisms and nuclear‑fuel‑handling equipment.
• Chemical Industry: Bolts for nitric‑acid production equipment, vinyl‑chloride‑monomer reactors and uranium‑conversion‑unit flanges.
• Energy & Environmental Protection: Fixing bolts for flue‑gas‑desulfurization components in coal‑fired power plants and incinerator thermowells.
• Heat‑treatment Industry: Connecting bolts for high‑temperature furnace heating elements, radiant tubes and muffle‑furnace linings.
• Aerospace: Fasteners for turbine engine high‑temperature sealing components and combustion‑chamber parts.

4. Standards & Certifications

• International Standards:
  • ASTM B166 (bar stock), ASTM F467 (bolts), ISO 4014 (hex bolts), DIN 931 (hex bolts).
• Certifications:
  • PED (Pressure Equipment Directive), EN 10204 3.1/3.2 material test certificates, compliant with NACE MR0175 for sulfide‑stress‑cracking resistance.

5. Manufacturing Process

• Raw Material: Produced by Vacuum Induction Melting (VIM) + Electroslag Remelting (ESR) process to guarantee high purity and homogeneous microstructure.
• Forming Methods:
  • Hot Forging: Heating temperature 1050‑1150 °C to avoid grain coarsening.
  • Cold Working: Cold‑drawn or cold‑rolled products require solution annealing (1095‑1120 °C) to restore ductility.
• Surface Treatment: Optional zinc plating, nickel plating, PTFE coating and other treatments to enhance corrosion resistance and anti‑seizure performance.

6. Typical Room‑temperature Mechanical Properties

7. Global Equivalent Grades

8. Usage Notes

• Hot‑working Control: Avoid prolonged holding within the sensitive temperature range of 900‑1000 °C to prevent grain coarsening.
• Environmental Compatibility: Avoid contact with molten metals such as lead and zinc to prevent hot brittleness.
• Installation Torque: Pre‑tightening force must be precisely controlled to prevent cracking caused by stress concentration.

Summary